How to Use the Emergency Tire Repair Kit for Ram, Jeep, Chrysler and Dodge Models

Watch this video for a step-by-step play of all the steps to go through in repairing your tire and checking the tire pressure:

How to Use the Emergency Tire Repair Kit for Ram, Jeep, Chrysler and Dodge Models

There are so many situations where Toronto drivers need to get somewhere to get something important done, that even the mere thought of having a tire blow out can cause some anxiety.But if you get a flat tire on the road while you’re in your Dodge, Chrysler, Jeep or Ram, the Mopar emergency tire repair kit will get you back on the road in no time.  Here’s a brief rundown of what you have to do to fix your tire and get your vehicle up and running again.

Knowing how to use the emergency tire kit can save you a lot of time in the event of a flat tire. All you have to do is locate the repair kit on your trunk’s left side and fix the tire yourself. The kit comes with all the makes and models we carry including Viper and Hellcat.

Of course if you have roadside assistance with your vehicle, you can obtain assistance quickly, and you can check your owner’s manual to see if you have this Otherwise, in the event of a flat tire, pull over to the side of the road in a safe area. Turn on your hazard lights, and position the tire needing repair so that the valve is close to the ground.

Place the transmission in gear, turn off the ignition, and set the parking brake.

After accessing the kit, just connect the repair kit’s hose to the valve stem on the tire. Then the power chord can be plugged into the 12-volt outlet that’s located below the controls for your HVAC.


Categories: News, Automotive Technology